web analytics

Archive | Survival

Baryonyx Knife Company

I recently came across Baryonyx Knife Company and I am very glad that I did. They are offering a new and extremely useful level of customer service.

baryonyx knife coThey offer two unique services, one free and one premium, that solve a lot of the problems associated with buying knife, machetes, and axes online. The first is the 7 point hand inspection that everything they sell goes through before they put into stock. Items that pass their inspection are sold in the store. Items that do not pass but are still near perfect and functional are sold as “B” grade at a reduced price. It is important to note that these are not seconds. They are perfectly functional just not up to Baryonyx Knife Co.’s high standards. If an item has flaws that could present a functional issue, they are returned and never even make it into stock.

The second service is an optional “Special Grade” service. The service is available on most items that they sell and each Special Grade is unique to the item, designed to improve it in some key area. Most of the Special Grade services seem to range from $2-$8.

So why is all that useful? Good question. Here are a few examples…

Let’s say you want to buy a Condor Knife & Tool axe or hatchet but you know that, as with any axe, it is best to see them in person to check to see it is hung straight and that the grain orientation is right. At Baryonyx Knife Co. all the axes go through the hand inspection. They have already checked that their axes are hung straight, have proper grain alignment, etc.

This Condor Scout Hatchet has a workable edge but it is still a bit thick behind the edge.

This Condor Scout Hatchet has a workable edge but it is still a bit thick behind the edge.

What if you wanted an Estwing Tomahawk but you knew from your research that the bit is sharpened at an angle that is more appropriate for an entry tool than a survival tool meant to work wood. That is no problem. If you select the $6 Special Grade option, Baryonyx Knife Co. will thin and refine the edge for wood working.

Now let’s say you want a Tramontina machete which are known for being a great value as a survival tool but also known for needing a fair amount of work before they are truly ready to use. The $4 Special Grade option will see that the scales are ground flush with the tang, the edge is convexed, the point is ground sharp, and the spine is squared for use as a striker. That $4 corrects every short coming with the Tramontina machetes and adds some additional functionality.

After the Special Grade treatment, it is thinned and refined. Now it will bite into wood more efficiently.

After the Special Grade treatment, it is thinned and refined. Now it will bite into wood more efficiently.

Those are just a few examples of how Baryonyx Knife Co.’s unique services can benefit you. I can’t tell you how glad I am to come across a retailer like this especially for axe buying. Now if I could just convince them to pick up some additional axe lines and start offering a Kydex sheath making service at the point of purchase, I might never shop any where else!

Check out Baryonyx Knife Company. They have more than just axes and machetes. They have a full line of knives, sharpening and maintenance products, the manliest hand made soaps you have ever seen (I’m not kidding), and more.

J. Willard Heritage Tools

Walk into any hardware store and check out their axes. I can tell you exactly what you will find – axes made with poor quality steel that is too soft to hold a proper edge, too thick through the cheeks to ever cut well, lacking a finished edge, on a handle that is either soul-less fiberglass or bottom of the barrel hickory with terrible grain structure. We have all heard the saying, “They don’t make them like they used to.” I suspect that whoever coined that term, was talking about axes.

J. Willard Axe 2

Thankfully, there are still plenty of high quality vintage axe heads left from a time when America knew how to make them and there are still people who appreciate them. Most importantly, there are still people who know how to sharpen and hang them (to hang an axe is to fit a new handle), restoring them to usefulness.

One such person is Jeremy Dillon of J. Willard Heritage Tools. He restores vintage axes and resells them on Ebay. His restored axes come ready to work and they often sell at prices similar to what you might pay for a hardware store axe. These axes have already served as tools to a previous generation and with a little care they can serve the next generation.

He would like to expand his operation so he has started a crowd funding campaign with a pretty modest goal of just $1700. There are some VERY nice benefits available to backers including lifetime sharpening and hanging of any wood handled tool (very valuable), a restored axe along with lifetime sharpening and hanging, a day of forestry training from Jeremy, and more.

Check out J. Willard Heritage Tools on Ebay. Consider helping out on their indiegogo crowd funding campaign.

J. Willard Axe 1

War Chief Tomahawk – Helm Enterprises, Grinding Division

Helm Enterprises is turning out some incredible custom tomahawks at prices that are very competitive. They offer tomahawks in a variety of lengths and configurations but one that caught my eye recently is called the War Chief.

Helm Grind War Chief 2

Helm Enterprises offers two different spiked tomahawk configurations – one with a pry spike and one with a combat spike. The War Chief is the combat spike model. The War Chief, like all Helm Enterprises tomahawks are ground from 1/4″ thick 4140 steel and has micarta handle slabs. It is available in a variety of lengths but the 12″ version that they recently shared on their site looks extremely practical.

There are two features of Helm Enterprises tomahawks that I really appreciate and both have to the do with the handle slabs. First, they provide very tall slabs which makes it easy to vary the height of your grip. The sweet spot on a tomahawk is often about 2/3rds of the way up the handle and some makers don’t make their slabs tall enough to grip in that location. Second, they fit their handle slabs so they are flush with the tang. Exposed tangs can really beat up your hand over a few hours worth of use.

Check out Helm Enterprises, Grinding Division.

Helm Grind War Chief

KA-BAR MSM Knife 001

KA-BAR had several notable releases at SHOT Show this year including collaborations with noted knife makers like Rick Hinderer and Mike Snody. They released a collaboration knife with someone not necessarily known for their work in the knife world – Mil-Spec Monkey (MSM).

ka-bar-msm-knife-001

The new KA-BAR MSM Knife 001 is a tactical fixed blade for the budget minded user. It is a healthy, 8.5″ long slab of SK5 steel with a black coating and cord wrapped handle. The 3.5″ blade has an aggressive American tanto shape with an unsharpened false edge. The MSM Knife has plenty of jimping for grip and a massive thumb ramp.

The sheath looks very well sorted out, especially for a budget knife. If you know MSM, you know this sheath is going to be MOLLE compatible. It is designed to mount to PALS webbing via MALICE Clips.

Check out the KA-BAR MSM Knife 001 at Mil-Spec Monkey.

msm-kabar-1-017

Review: Gearward Compact Survival Cord

It was kind of hard to take the paracord out of my EDC bag and set it aside. I have been carrying it for years and it has come in handy numerous times. I suppose that, like most guys who like to be at least a little prepared, I was used to having paracord with me and it was going to take something pretty exceptional to displace it. In my case, that something exceptional was Compact Survival Cord from Gearward.

Gearward Compact Survival Cordage

Overview

Compact Survival Cord comes in 3 different configurations each wound on a special spool that is part of the success of this cordage. They are listed below from largest to smallest:

  • Small – 50 feet of 600lb break strength Technora line
  • Mini – 50 feet of 200lb break strength Kevlar line
  • Micro – 25 feet of 200lb break strength Kevlar line (sold in pack of 2)

The cord comes pre-wound on a plastic spool that has one hard plastic side and one flexible plastic side. The flexible part can be folded to open or close the spool. I’ll expand on this later in the review.

Observations from Use

All three sizes are FAR more compact than a comparable amount of paracord. This alone could have bumped paracord out of my EDC bag but there are even more advantages to explore.

The spool that this cordage comes on is part of the magic of this package. It makes it so easy to carry and work with this cord. As I mentioned above, it can be opened and closed via its flexible plastic side. This ensures that you have full access to the cord when you need it and that it doesn’t unravel in your bag when you aren’t using it. It can also be used to keep the working end accessible by closing the flexible side on the end of the cord. I really appreciate that when my hands are cold.

Gearward Compact Survival Cordage Closed Gearward Compact Survival Cordage Open Gearward Compact Survival Cordage Retained Working End

The “Small” size, which is the largest of the bunch, has the highest break strength of any of the cords that Gearward sells. The Technora line is half the diameter of paracord but stronger, more resistant to heat and other environmental factors, and lighter in weight. In spite of all that, it was the least useful to me in part due to its larger size. I don’t use the cord for many applications that really push its break strength so more cord in a smaller package is probably more useful to me. I would love to see Gearward offer a Kevlar cord option on this large spool size.

The Mini and Micro sizes are most useful to me. They are both extremely compact and both packed with 200lb break strength Kevlar cord. The Kevlar cord is extremely versatile. It can be unraveled readily into three separate strands, each with a break strength of around 60lb. These single strands are more than strong enough to serve as lashings in a survival shelter and well suited to be used in gear repairs if you also have a sewing needle in your kit. The Micro in particular is small enough to fit an Altoids tin style survival kit with plenty of room to spare for other items.

Gearward Compact Survival Cordage Scale

Wrap Up

This is a fine example of something that is greater than the sum of its parts. The spools are good. The cordage is good. Together, they are great. These are lightweight, compact, and extremely functional. It may be sacrilege to the cult of EDC but these might just stand a chance of bumping paracord from your bag.

Check out all 3 sizes of Compact Survival Cord at Gearward.

Cross posted from JerkingtheTrigger.com

Vigilant Gear Micro SERE Kit

Vigilant Gear has access to all the best survival and E&E tools. They know the tools inside and out. It makes absolutely perfect sense that they would start offering their own kits.

The first kit to be available through Vigilant Gear is the Micro SERE Kit. It is, as the name implies, a very compact E&E kit. How compact? I’m glad you asked. The entire kit will be 2.3″ x 1.8″ x .5″.  You could hide it under a business card! It’s definitely small.

You can see the contents of the kit in this image that Vigilant Gear produced (below).

Vigilant Gear Micro SERE Kit

Final pricing and availability information will be released soon. Check out Vigilant Gear.

New from Ka-Bar

Those of you who know me from my other blog, Jerking the Trigger, know that I am a fan of the Ka-Bar TDI. It should come as no surprise that I was excited to see a new TDI variant being displayed at the SHOT Show. It’s called the Hellfire and it is a collaboration with both TDI and Rick Hinderer. It features the typical TDI series offset blade angle paired with recurve American tanto shaped blade with a deep, jimped thumb notch on the spine.

Ka-Bar TDI Hinderer Hellfire

Ka-Bar has also shown the first fruits of their collaboration with Mike Snody. The Snake Charmer is a compact, fixed blade neck knife with no scales, slight finger grooves, and a pinky loop for retention. It features S35VN blade steel. You can also see the first images of the Ka-bar Snody Boss and Big Boss (below).

Ka-Bar Snody Snake Charmer

Ka-bar Snody Boss and Big Boss

There will also be a few additions to their Johnson Adventure Blades series. The smaller of the two is the wharncliffe shaped Wharnstalker. The larger is a new Johnson Adventure Blades take on the classic Parang called the Parangatang. The Parangatang in particular looks very interesting.

Ka-Bar Johnson 2014

Check out Ka-Bar.

Justin Gingrich Signature Series Knives from White River Knives

If you are familiar with hard use knives, you are likely familiar with former Army Ranger Justin Gingrich or you are at least familiar with Ranger Knives which was his company. Ranger Knives was purchased by Ontario Knife Company and many of Justin’s designs are still offered by OKC today. Justin has started a new company, Gingrich Tactical Innovations (GTI), that makes custom knives and offers tactical training. He has also been working in collaboration with White River Knives.

White River Knives is showing off some of Justin’s latest designs in their booth at SHOT Show (2848). The series consists of a lightweight neck knife, a smaller utility knife, and a larger field knife. The utility and field knife both feature textured micarta slab handles and fairly tall saber grinds.

White River Knives GTI Signature

Interestingly, all knives in the series are Ionbond coated. This coating is used more in the firearm industry than the knife industry. It offers a dark black finish that is extremely wear resistant, corrosion resistant, and has very high surface hardness.

These knives will be available after the SHOT Show.

SHOT Show E&E Kit from SerePick

Oh no! Your pinned down by a talkative product rep who is bending your ear about how awesome the Taurus Judge is. Its time to put your SHOT Show E&E plan into action and this SHOT Show exclusive, custom kit from SerePick just might help (if the Taurus rep has physically restrained you in some way which I doubt they would, but still… you never know).

This kit will only be available at the SHOT Show and you are going to have to track down Matt at SerePick to get one. They will cost $50 or you can potentially barter for them (I suggest good bourbon or maybe comfortable walking shoes, those would be worth a mint on the show floor).

SerePick SHOT Show Kit

The kit consists of a compact plastic case and several other useful items…

  • Bogota Nano Entry Toolset
  • Quick Stick X2
  • EZ Decoder X2
  • Polymer Universal Handcuff Key X2
  • Steel Split Pawl Handcuff Shim X2
  • Glue Dots X2

You will have to add your own pocket change because the dime in the photo is just there for scale. This kit is tiny.

Check out SerePick.com.

Powered by WordPress. Designed by Woo Themes